Suitable for Samsung Xing smart TV, Bluetooth voice remote control, BN59-01312F
Set-top box remote control settings precautions:
1. When setting up the set-top box remote control, it is necessary to maintain the stability of both remote controls and not shake them;
2. When setting up the set-top box remote control, the transmitting heads of the two remote controls should be in the same straight line and the distance should be within 3 to 10cm;
3. If the set-top box remote control setting function is enabled and no button is selected within 14 seconds, it will automatically exit the learning state. If no learning is performed within 14 seconds after selecting the button, it will also automatically exit the learning state;
4. Pressing the settings button while learning to select keys and waiting for signals on the set-top box remote control will exit the learning function.
Installation of TV set-top box:
1. Connect one end of the red, white, and yellow AV cable to the AV jack at the back of the set-top box, plug it in according to the color, and the other end is plugged into the AV input at the back of the TV (note again: it should be plugged into the input jack, you won't see anything when you plug it into the output).
2. Insert one end into the TV and the other end into the signal cable on the wall panel (which is the coaxial cable). Do not move the section on the wall, unplug the TV end and plug it into the signal input of the set-top box (note again: the signal input port, or some brands call video input, must be on the input).
3. Insert the smart card into the card slot, be sure to make sure the chip is flush downwards and inserted firmly.
4. You can open both the set-top box and the TV, and first use the remote control of the original TV to set the TV to video mode (which is the original DVD viewing mode).
5. The rest is waiting for authorization. Once authorized, you can watch.
The above is the relevant content about set-top box remote control settings, hoping to be helpful to everyone!