Remote control manufacturers wholesale wireless intelligent led light remote control, lighting wireless remote control, lighting wireless remote control, old-fashioned lighting remote control, led lig
Remote control manufacturers wholesale wireless intelligent led light remote control, lighting wireless remote control, lighting wireless remote control, old-fashioned lighting remote control, led light remote control
How do I use the Internet TV remote control?
How to use the network TV remote control:
The first step is to match the TV with the network TV remote control. Generally speaking, select the Set button on the remote control, and then click it for about 2~3 seconds, and then release it.
The second step is to select some other buttons on the network TV remote control to simulate some operation options in TV. It takes about 10 seconds after pressing to see if the indicator light flashes. As long as it flashes, it means that the signal will be set after receiving.
The third step is to match the settings of the network TV with the remote control and use it after matching.
HD TV remote control.jpg
Install the battery.
The network TV remote control is in normal use. The battery needs to be installed. Pay attention to the use of new batteries. Do not mix the old and new batteries. It is easy to damage the remote control and shorten the use time.
How to turn on the TV.
Press the red button on the network TV remote control to turn on sleep TV. But some universal remote controls need to turn on the TV to control, so you need to turn on the TV through the switch on the TV.
How to change channels.
Activate the remote control before replacing the universal remote control. Generally speaking, the buttons of major brands of TV are on the universal remote control. Press the corresponding digital button for a long time according to your TV brand until the red indicator light of the remote control flashes, indicating that the universal remote control is activated and can be used normally.
First, we need to confirm whether there is a TV button area on the remote control of the online TV box. If so, it means that the remote control has the learning function and can be connected with the TV remote control to learn. After docking, we can use the remote control of the online TV box to control the TV box and TV.
Rca tv remote control.jpg
The general docking method is as follows:
1. Press and hold the setting key of the remote control of the network TV box for about 2 seconds, release the setting key after the red light is on, and the remote control is in the learning standby state.
2. Relative to the infrared transmitter of the TV remote control and the network TV box remote control, press the TV remote control [standby key], the TV box remote control indicator light will flash, and then press the TV box remote control learning area [standby key], at this time, the indicator light will turn on again, indicating that the TV box has completed the backup key learning of the TV remote control;
3. Next, you can install the above operation methods and learn other buttons on the TV remote control, such as the volume button and the channel key.
4. After successful learning, press the setting button on the remote control of the TV box to exit the learning status;
5. Next, users can use the TV button on the remote control of the online TV box to control the TV. For example, press the standby button to put the TV into standby mode, and adjust the volume of the TV according to the volume button.