1.rgb灯遥控器产品特点1. 可编程遥控器，功能可定制。2. 21键鼓包红外线遥控器，手感舒适，按键灵敏，远距离控制，外型时尚美观。3. 遥控发射角度60度。4. 外壳采用ABS原料，经久耐用。5. 支持红外线2.rgb灯遥控器支持OEM1. 外壳和按键的颜色2. 外壳和按键的丝印内容3. PE/铭板丝印内容4. 按键功能。5. 距离发射要求。红外线遥控器、rgb灯遥控器、rgb灯带红外遥控器、
1.rgb灯遥控器产品特点
1. 可编程遥控器，功能可定制。
2. 21键鼓包红外线遥控器，手感舒适，按键灵敏，远距离控制，外型时尚美观。
3. 遥控发射角度60度。
4. 外壳采用ABS原料，经久耐用。
5. 支持红外线
2.rgb灯遥控器支持OEM
1. 外壳和按键的颜色
2. 外壳和按键的丝印内容
3. PE/铭板丝印内容
4. 按键功能。
5. 距离发射要求。
红外线遥控器、rgb灯遥控器、rgb灯带红外遥控器、rgb灯条遥控器、rgb风扇灯遥控器
What if the remote control of the network set-top box fails?
The main function of the network set-top box remote control is to control the set-top box, thus realizing the remote control of TV control. There is no need to set up some TV set-top boxes for use. If the remote control of the network set-top box fails, you can try the following solutions:
Network set-top box remote control.jpg
1. The battery of the remote control of the network set-top box is dead. Try to replace it with a new full battery.
2. The receiver in the network set-top box is faulty. If it is radio and television, it can be sent to the business hall for replacement or maintenance. If it is a network set-top box, you can check it with a merchant or send it to a maintenance station for repair.
3. The failure of the remote control of the network set-top box is usually caused by the damage of internal components (crystal vibration is usually easy to damage). If you press any button on the remote control of the network set-top box and the red light of the set-top box receiver does not light up, it can be determined that the crystal vibration is damaged), you can go to the maintenance department for repair. If it is a radio and television set-top box, you can buy a new one in its business hall or have it repaired.
4. Generally speaking, there will be a red "standby" button above the remote control of the network set-top box. Through this button, we can use it to control the switch of the set-top box. Some set-top boxes are also equipped with an email button to view the email sent to us by the system. At the same time, the return button on the remote control can return to the previous level of operation or cancel the wrongly entered number.
5. The battery of the remote control of the network set-top box is charged, but cannot be used. At this time, you can check whether the contact power of the remote control is invalid. Generally speaking, if the battery contactor placed on the remote control is rusty, it will cause the network set-top box remote control to fail. At this point, you just need to polish it again.
3. If the failure of the network set-top box remote control mainly occurs on the circuit board or the circuit board in the remote control is damaged, it is better to check in the home appliance maintenance department to see if you can buy a universal remote control or configure a network set-top box remote control of the same model
Set-top box remote control learning.jpg
matters needing attention
1. There are many kinds of remote controls for network set-top boxes, so different types of set-top boxes are equipped with different remote controls, so the network set-top box remote controls can only be used for specific set-top boxes, not general ones.
2. Some network set-top box remote controls do not need to be set before use, but some network set-top box remote controls need to be set before use.