Applicable to Hisense TV remote control CN3A17 intelligent network HZ39E35A 32E35A 43E35A

Applicable to Hisense TV remote control CN3A17 intelligent network HZ39E35A 32E35A 43E35A

Do you know where the use of the air conditioner remote control is?

The basic functions of the remote control are the same. The air conditioner remote control is used well, which can not only make the room environment more comfortable, but also save energy and electricity.

Today, let's learn how to use the remote control for air conditioning.

(Note: Some series models do not have the left and right scavenging function. If you press the left and right scavenging button, the passive buzzer of the air conditioner will emit a drip sound, and the air conditioner will remain in its original working state. The single cooling model receiving the heating signal will not have any response.)

Air conditioner universal remote control.jpg

1. Prerequisites for using the remote control

Radio frequency remote controller: generally, the remote controller is configured as a high-end model, and the effective receiving linear distance of remote control is 50 degrees m. Usually, pairing processing is required. Only one air conditioner can be actually controlled, which belongs to a single control. There is no need to pair again after the pairing is successful.

Infrared remote control: the linear distance received by the effective remote control is generally 88m. Multiple air conditioners can be turned on/off at the same time.

Precautions: Multiple remote controls installed in the home must be used one by one, and cannot be used interchangeably to prevent the new remote control from failing to start.

2. Remote control function description

On/off key: press this key to turn on/off the air conditioner. Turn on/off the original timing, sleep and other functions. If the power supply battery is low, a full-screen reset or the battery light will flash.

Wind speed button: press this button, the wind speed will change circularly

Note: Pressing this key under the dehumidification of the air conditioner cannot adjust the wind speed, which is the low wind speed.

△/▽ key: Each time the set value of △ or ▽ key decreases or increases by 1 ℃, press and hold the △ or ▽ key for more than 2 seconds, the temperature value changes rapidly until the information is released, and the temperature setting range is 16~30 ℃.

Note: At the same time, press and hold the △/▽ button, and the keyboard of the remote control is locked. At this time, other operations are invalid. At the same time, press and hold the △/▽ button again to unlock.

(When locking the icon, press and hold the △/▽ key to unlock)

Up and down sweeping button: when simple sweeping, select sweeping to stop sweeping. Select the upper and lower scavenging status when the air is frozen.

At the same time, press the shutdown status △ button and the up and down scavenging button to switch between the simple scavenging mode and the fixed scavenging mode. The remote control flashes for two seconds.

Sweep button: simple sweeping, select sweeping, and stop sweeping. Select the left and right scavenging status when the air is in the fixed frame:

At the same time, pressing the shutdown status △ button and the left and right sweeping buttons can also switch between the simple sweeping mode and the fixed sweeping mode, and the remote control flashes for two seconds. The remote control is a universal remote control. The sweeping state is the same when receiving and the sweeping state is the same when receiving.

Universal remote control air conditioner remote control.jpg

Note: Due to the generality of the manual and the remote control, some series models do not have the left and right scavenging function.

Refrigeration button: press this button to run the refrigeration mode.

Heating button: press this button to run the heating mode.

Mode button: press this button to change the cycle mode as follows:

Note: the single cooler does not receive the start heating mode signal

Strong button: only press this key to set strong on (strong wind words displayed) or off (strong wind words not displayed). It is not recommended to use forced pressing for a long time. The powerful function is blocked when selecting the sleep function. At this time, the powerful button is only used as the confirmation key for entering the setting and query of Sleep 3. See the operation instructions of sleep button for specific operation methods.

Lighting button: press this button to control the light switch on the air conditioner display.

Note: For users who are not accustomed to the night light affecting their sleep, you can use the remote control light button to select whether the panel display light is on or off

Mute button: press this key to set mute on (display the word "mute") or off (do not display the word "mute").

Note: Mute is off by default after power-on.

Dry auxiliary heat button: under the dehumidification of refrigeration air conditioning, press this button to set dry on (display dry word) or off (do not display dry word). Under refrigeration and air conditioning dehumidification, dry and turn off the internal fan, and operate the low windshield for about 12 minutes. The purpose is to dry the water on the evaporator door to prevent mildew. At this time, explain that the guest's complaint will not be closed.

Press this key to change the cycle of auxiliary heating state in heating mode as follows:

When the heating mode is turned on, the remote control automatically restores the last set auxiliary heating state.

Timing button: in the power-on state, press this button to set the power-off time; In the shutdown state, press this button to start the machine at the set time. Press this key once, and the hour off (on) word flashes. At this time, press the △ or ▽ key to adjust the timing time (continuously press and hold the △ or ▽ time value to change quickly), and the setting range is 0.5~24 hours; Press this key again to confirm the timing time, and the hour off (on) word will not flash.

If the text is flashing, do not press the timing key, and exit the timing setting after 5 seconds. If the timing has been determined, press this key again to cancel the timing.

Key precautions: try not to operate the remote control during the timing operation. If you operate the remote control again, the timing will be inaccurate.

Sleep button: press this button to select Sleep 1. Sleep 2. Sleep 3. Sleep 4 and Close Sleep. The cycle is as follows:

Sleep 1: cooling mode: after entering sleep state and running for 1 hour, the set value of the host increases for 1 hour. ℃, after 2 hours, rise to 2 hours, and then operate normally according to this set value. Heating mode: after 1 hour of sleep, the set value decreases by 1 ℃, and after 2 hours, it decreases by 2 ℃, and then the set value operates normally.

Sleep 2: It is a set of sleep temperature curves preset by the system.

Sleep 3: sleep curve setting in custom (DIY) sleep mode:

① In Sleep 3 mode, press and hold the strong key to enter the user's personalized sleep setting state, as shown in the following figure: ② Adjust the △ key or ▽ key to change the corresponding setting value. After adjustment, press the strong key to confirm to enter the setting value for the next hour. When the remote control restores the original display, the temperature setting is completed after 8 hours, and the sleep curve setting is completed.

③ Without pressing any button, the remote control will automatically exit the sleep curve setting state and restore the original display. Press on/off to sleep regularly, and exit the sleep curve setting when E enjoys or turns to the mode.

Sleep 4: siesta mode. According to the characteristics of siesta, the set value changes automatically.

Note: Sleep is cancelled by default after the air conditioner is powered off; When the sleep function is turned on, the silent wind speed is automatically turned on.

Energy-saving button: only in the cooling mode, press the button, and the remote control will display that the whole machine will enter the comfortable and power-saving mode; Then press this button to exit this mode.

Note: When SE is displayed on the remote control, press the energy-saving key to release it.

Air conditioning remote control.jpg

Key notes:

① When the frequency converter uses the wind speed silent gear or sleep gear, the operating frequency will not be very high and may not be cold enough;

② It is recommended to have high wind speed before sleeping in high temperature weather and at least two wind speeds for cooling after sleeping.

3. Smart use of mode function

The commissioning of air conditioning mode is also very important in addition to the commissioning of simple mode!

3-1. Refrigeration mode: press the mode key to convert to snowflake symbol. Direct cooling. With temperature key.

3-2. Automatic mode: press the mode key to convert it to triangle tip symbol. Generally, large temperature difference between day and night is adopted, and the air conditioner automatically adjusts according to the indoor temperature. High temperature refrigeration, low temperature heating. Quite convenient. Please note that the temperature key cannot be set in this state. The temperature key on the right is blank.

3-3. Air conditioning dehumidification: press the mode key to convert to water drop symbol. If the room is hot and humid, it can be dehumidified. And the work is not continuous, only dehumidifying. In midsummer, the weather is sultry after rain, and the air humidity is high. At this time, turn on the air conditioner to dehumidify, which can not only dehumidify, but also keep the indoor temperature appropriate.

3-4. Air supply mode: press the mode key to convert to fan symbol. The air conditioning fan works mainly on the second day after indoor ventilation.

3-5. Heating mode: turn on the air conditioning switch, display the solar mode, which represents indoor heating. It is generally used more in winter.

3-6. Switching between Celsius and Fahrenheit: the remote control is off/standby, while pressing the mode- Celsius can be converted from Celsius to Fahrenheit by pressing the key (temperature minus key).

At this time, press the mode - key (temperature minus key) to switch back to Celsius (℃).